Product ID:1544-HT HIGH TEMPERATURE ROSIN FLUX
MSDS Date:12/12/1986
FSC:3439
NIIN:00-400-1972
MSDS Number: BQCRS

Emergency Phone: 312-297-1600

Info Phone: 708-297-1600

Cage: 09185

Telephone: 847-297-1600

Cage: 75297

MODIFIED ROSIN

Fraction By Weight: 50%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LIQUID IS IRRITATING TO SKIN AND EYES,
CAUSING CORNEAL OPACITY.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:VAPORS RELEASED DURING SOLDERING CAN CAUSE
HEADACHE, NAUSEA OR RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES CONTACT: FLUSH WITH WATER FOR 15 MIN. AND GET MEDICAL
ATTENTION. SKIN CONTACT: WASH WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. INGESTION: INDUCE VOMITING AND CALL A
PHYSICIAN.

Flash Point Method:COC
Flash Point:183F,84C
Lower Limits:1.5
Upper Limits:9.7
Extinguishing Media:CARBON DIOXIDE, ALCOHOL FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:ELIMINATE IGNITION SOURCES. SOAK UP WITH AN
ABSORBENT. WASH RESIDUE AWAY WITH ALKALINE DETERGENT.

Handling and Storage Precautions:AVOID EYE AND SKIN CONTACT. AVOID
BREATHING SMOKE DURING SOLDERING.
Other Precautions:NONE

Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST: REMOVE SMOKE FROM BREATHING AREA. MECHANICAL
(GENERAL): RECOMMENDED.
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
NONE

HCC:V4
Boiling Pt:B.P. Text:350F,177C
Vapor Pres:2.3
Vapor Density:3.5
Spec Gravity:1.065
Evaporation Rate & Reference:0.07 (BUTYL ACETATE=1)
Solubility in Water:50
Appearance and Odor:THICK, DARK AMBER LIQUID WITH MILD ODOR.
Percent Volatiles by Volume:49.5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:MAY EMIT HYDROGEN CHLORIDE FUMES
(<0.5% OF FLUX).

Waste Disposal Methods:ACCORDING TO LOCAL REGULATIONS. USUALLY BY
INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.